IDC cable assembly "The insulation displacement contact (IDC), also known as the insulation penetration contact (IPC), is an electrical connector designed to connect the conductors of insulated cables. Through the connection process, one or more blades that are selectively sharpened are forced to pass through the insulation without peeling off the insulation conductor before connection. When it is...
What is Lvds? Low voltage differential signal (LVDS), also known as TIA / eia-644, is a technical standard that specifies the electrical characteristics of the differential serial signal standard. LVDS uses cheap twisted pair copper wires to operate at low power and can operate at very high speed. LVDS is only a physical layer specification; Many data communication standards and applications use i...
What is OBD Connector? On-board diagnostics (OBD) refers to automotive electronic systems that provide maintenance technicians with the ability to diagnose and report on the vehicle itself. OBD enables technicians to access subsystem information for performance monitoring and analysis of maintenance requirements. OBD is the standard protocol used by most light duty vehicles to retrieve...
Where are the applications of DB9? The DB9 connector and DB9 cable are mainly used for communication, network, and video. The specific contents are as follows: 1. Communication interface/connection One of the most widespread uses of D-sub is for RS-232 serial communication. Although this standard is not currently mandated, it has been accepted by the industry. The RS-232 devic...
1. what is the sheathed wire? The sheathed wire can be understood as two or three parallel BV wires (here refers to the BVV sheath wire), BV wires originally have insulation rubber, in three or two parallel BV wires and then coated with a layer of rubber, this layer of rubber is the sheathed wire. Sheath wire is also a common household wire, usually consisting of three or two cores. &n...
1.What is the shield wire? Shielded wire is a transmission cable that uses a network of braided wires to wrap the signal wire. The conductor wrapped around the conductor is called shielding wire, and the wrapped conductor is called shielding layer, which is generally braided copper network or (aluminum). The shielding layer needs to be grounded so that external interference sign...
In the whole system of automotive wiring harness, the headlight wiring harness has been easy to ignore the topic, today let's discuss the classification of the headlight wiring harness. The headlight wire harness is not a high-voltage wire harness, but a kind of low-voltage wire harness. Wiring harness is generally copper multi core flexible wire, a few specifications commonly used o...
Twisted Pair (TP) Cable is the most commonly used transmission medium in comprehensive cabling engineering. It is composed of two copper wires with an insulating protective layer. When two insulated copper wires are twisted together at a certain density, the radio waves radiated by each wire during transmission will be cancelled out by the radio waves emitted by the other wire, effective...
Ribbon cable (also known as multi wire flat cable) is a cable with many wires running in parallel on the same plane. Therefore, the cable is wide and flat. Its name comes from its similarity to a ribbon Ribbon cables are usually used for internal and external devices of a computer, such as hard disk drives, CD drives, and floppy disk drives. In some older computer systems, suc...
Audio coaxial cable: cable used for transmission of audio and audio signals The Audio Coaxial Cable audio InterFace, standard SPDIF (Sony/Philips Digital InterFace), is jointly developed by SONY and Philips Corporation. The coaxial mark on the back plane of the audio-visual equipment is coaxial, which mainly provides the transmission of digital audio signals. Coaxial audio interface ...
FFC cable (Data transmission cable) FFC cable is also known as flexible Flat cable (FFC). The number and spacing of wires can be selected arbitrarily to make the wiring more convenient, greatly reduce the volume of electronic products, reduce production costs and improve production efficiency. It is most suitable for data transmission cable between moving parts and motherboard, PCB board...
What is the difference between solar photovoltaic cable and electrical cable? The purpose is to transfer current, the difference is that the transmission of current at the same time for the use of the environment is not the same, that the composition of the cable material and technology is different. Photovoltaic solar cable types include PV1-F, H1Z2Z2-K, and 62930IEC131 Electrical c...
once you subscribe our newsletter. we will keep you posted the latest catalog,Also will inform you the trendy news for the electronics and wire harness.