It is dangerous for your car and yourself to use a faulty engine fuel injector wire harness. You should replace it with a new fuel injector wiring harness asap so that the function of the injector can be safely activated and the car can operate normally. Fuel injectors are part of the process that supplies gasoline to a car's internal combustion engine. Without this, your car will no...
Terminal Blocks--What is it? A recognized component of any engineer's connector toolbox, junction boxes have been used for years to provide semi-permanent, secure wire connections for a wide range of applications. A terminal block, also known as a connection terminal, terminal connector, or screw terminal, consists of a module housing and insulator that connects two or more wires tog...
The connector is a kind of component that our electronic engineering technicians often contact; Its role is very simple: in the circuit is blocked or isolated between the circuit, set up a bridge of communication, so that the current flow, so that the circuit to achieve the intended function. Connectors are an indispensable part of electronic equipment. If you follow the path of current flow, you ...
The BUSBAR design selection is not only as simple as considering the ability of overcurrent. Usually when designing a battery, the most considers is busbar, paying attention to its overcurrent ability and heat. How do we judge when doing busbar design? It is a very important point to be warming. If we simply say how wide, how many layers thick, and how much the cross -sectional area, and th...
Is it auto wire harness? The auto wire harness is the network main body of the automotive circuit, and there is no car circuit without wire harnesses. The cable assembly refers to the connection between the contact parts (connectors) and the wire and cable that is made of copper materials, and then plastic the insulator or the metal housing on the outside to form a compone...
The production process of the cable assembly & wiring harness The first process of wire production is the tailoring process. The accuracy of the tailoring process is directly related to the entire production progress. Once an error occurs, especially the short -wire size, it will cause the rework of all stations, and the time -consuming effort will affect production efficiency. The...
The full name of OBD is On Board Diagnostics The purpose of the OBD plug is to monitor whether the exhaust is over the limit by the running condition of the engine. Since then, the system has become more and more useful, basically monitoring emissions-related components in real time and sending that information to the driving computer to determine whether the vehicle is working properly. If...
What is An ECU? Electronic Control Unit(ECU) Explained Electronic Control Unit (ECU) is short for electronic control unit. From the point of use is the car special microcomputer. The function of modern automobile is more and more rich. Every subsystem of automobile needs powerful ECU to control the work of this system. For example, the transmission ECU adjusts the appropriate gear acco...
The standard of the auto wire harness is different from that of ordinary electronic wire harness. Ordinary electric wire harness is a copper single stamen, with some hardness. The car wire harness are copper and soft wires, and some soft wires are as thin as hair. Several or even dozens of soft copper wires are wrapped in plastic insulating tube (polyvinyl chloride), soft but n...
The difference between electric vehicle wiring harness and ordinary auto wiring harness In recent years, the concept of new energy has become mainstream. Especially in the automotive industry, new energy electric vehicles have been vigorously launched. Their environmental protection, low-carbon and energy-saving characteristics just meet this demand. At the same time, most wiring ...
The auto wire harnesses is the network main body of the automotive circuit, and there is no car circuit without wire harnesses. The cable harness refers to the connection between the contact parts (connectors) and the wire and cable that is made of copper materials, and then plasticine the insulator or the metal connector on the outside to form a component of the connection circuit with a wire bun...
1. The composition of the high-voltage connector, basically: the case (public end, mother end), terminal (male and female terminal), shielding, sealing (tail, half end, line, contact) tail protective cap, high -pressure interoperability system , CPA1. The composition of high -voltage connectors, basically: case (public end, parent end), terminal (male and female terminal), shielding cover, sealed ...
once you subscribe our newsletter. we will keep you posted the latest catalog,Also will inform you the trendy news for the electronics and wire harness.