IDC cable assembly "The insulation displacement contact (IDC), also known as the insulation penetration contact (IPC), is an electrical connector designed to connect the conductors of insulated cables. Through the connection process, one or more blades that are selectively sharpened are forced to pass through the insulation without peeling off the insulation conductor before connection. When it is...

A 4-way trailer connector has basic lighting features; Running lights, left turn signals and brake lights, right turn signals and brake lights, and ground. A 7-way trailer connector has these functions and a 12-volt circuit, an electric trailer brake circuit (which requires a brake controller on board), and a reverse light or auxiliary power circuit.     Wiring diagram of 4-way trai...

Ribbon cable (also known as multi wire flat cable) is a cable with many wires running in parallel on the same plane. Therefore, the cable is wide and flat. Its name comes from its similarity to a ribbon       Ribbon cables are usually used for internal and external devices of a computer, such as hard disk drives, CD drives, and floppy disk drives. In some older computer systems, suc...

What does an Anderson plug do? Anderson plugs are increasingly being used by owners of campervans and caravans to charge auxiliary batteries while they are driving and to power electrical accessories while they are camping.     They allow the vehicle battery to power the trailer or trailer's electronic stability control system and can be used as an alternative to the 12-volt power supply...

Unlike traditional fuel vehicles, electric vehicles often have high voltage and current platforms, so there are often a large number of high -voltage connectors on new energy vehicles. From the perspective of the connector itself, there are many classification types of ev connectors: For example, there are round, rectangular, etc. from the shape, and there are high -frequency and low frequencies i...

The charging system can be divided into two methods: conventional charging and fast charging. From the perspective of appearance and size, the difference between the charging ports is actually very simple. The fast charging port is large and has 9 holes (two large holes, one middle hole, and 6 small holes). The slow charging port is small and has 7 holes (5 large holes and 2 small holes), so that ...

Anderson plug wire harness is mainly used for UPS power supply, 5G power supply, charger/pile, cleaning equipment, lithium battery, AGV intelligent carrier. So, what are the main types and characteristics of Anderson plug wiring harnesses? What should we pay attention to in the daily use process? Product category: 1, single-pole Anderson plug power harness: rated current 5A, 10A, 15A, 20A, 30A, 40...

With the development of the new energy area, the variety is increasing, and the demand for applications is also increasing sharply. In line with the development of The Times, the trend of energy conservation and environmental protection, Aichie Tech is vigorously engaged in the development and production of connectors in the field of new energy. In order to meet the increasing market needs, m...

SATA cable series SATA Cable SATA is an abbreviation for Serial Advanced Technology Attachment (Serial ATA), also known as Serial ATA. Used for data transfer between the host board and mass storage devices such as hard disk drives. SATA transfers are faster than ever and support hot swappable. In addition, the SATA bus uses an embedded time signal, with stronger error correction ability,...

What are DC power connectors? Dc power connectors, also known as DC plugs or barrel connectors, are common interfaces for providing DC power to small devices and devices. These plug and socket type connectors come in a variety of shapes, sizes and configurations and are commonly used to power electrical equipment or within low-voltage systems, such as subsystems within vehicles. Common examples of...

How to repair the car connector The connector is a socket with a wiring harness, the connection of the electronic control unit (ECU) and all external components is connected through the connector on the ECU, and the signal conversion in the wiring harness is also used by the connector. In an electronically controlled car, the ECU is the control center, the wiring harness is the neural network of t...

With the rise of new energy vehicles, the problem of charging has also followed, and has become an urgent question to be solved. In order to solve such problems, the demand for DC charging guns and AC charging guns is also increasing. This article will tell the advantages and disadvantages of DC Charging Plug and AC Charging Plug to judge how to choose DC charging or AC charging.   Advantages...